#gentoo

02 November 2007

Total 51 pages. You are browsing page 1/51.

First :: Prev :: [1] [2] [3] [4] [5] [...] :: Next :: Last

--- Log opened Fri Nov 02 00:00:05 2007
--- Day changed Fri Nov 02 2007
00:00 <****> kale: I believe so.
00:00 <****>
00:00 <****> kale: SIOCADDRT: File exists
00:01 <****> why does emerging xfce install gnome stuff? i thought it was independant of gnome
00:01 <****> blindoracle: so you have set the gateway!
00:01 <****> I ran the command you told me to, and got that error
00:01 <****> blindoracle: whats in /etc/resolv.conf ?
00:02 <****> kale: Two nameservers and a search line. search gkpt3.resnet.ucf.edu
00:02 <****> SkyLeach: yea it is a bit misleading :P
00:02 <****> blindoracle: can you ping the gateway?
00:03 <****> kale: No.
00:03 <****> blindoracle: are you running dhcp
00:03 <****> Stroller: only lo there in gentoo
00:03 <****> kale: dhcpcd
00:03 <****> blindoracle: route -n|nopaste
00:04 <****> Jester45, xfce uses gtk+ and probably some other stuff
00:04 <****> Jester45, also check your USE-flags
00:05 <****> ni1s: i know it uses gtk but that doesnt mean it should have gnome, i have all the defualt ones
00:05 <****> this is a fresh install
00:05 <****> Jester45, you have the "gnome" USE-flag enabled?
00:05 <****> where are they at?
00:06 <****> Jester45, emerge --info, check your /etc/make.conf
00:06 <****> kale: http://pastebin.ca/758153
00:07 <****> would it be bad to ctrl-c emerge?
00:07 <****> blindoracle: ping 10.40.72.1
00:07 <****> or should i wait till its connecting to the mirror
00:07 <****> Jester45: i do it all the time.
00:07 <****> Jester45: not really
00:07 <****> kale: 100% packet loss
00:07 <****> Jester45, if you know what you're doing
00:07 <****> Jester45: just don't Ctrl+C it while it's merging to the system
00:08 <****> blindoracle: dhcpcd -k eth0 && dhcpcd eth0
00:08 <****> Jester45: you're perfectly safe to Ctrl+C it while it's compiling or installing :)
00:08 <****> blindoracle: try ping again
00:08 <****> kale: 100% packet loss
00:08 <****> Stroller: any ideas? :P
00:09 <****> blindoracle: ping 212.242.40.3
00:09 <****> i ran these commands as root "/etc/init.d/hal start" & " rc-update add hal default" and it was not found errrr!!!
00:09 <****> Cyntek: is hal installed
00:09 <****> Kachna: are you back in Debian now?
00:09 <****> kale: 100% packet loss
00:09 <****> Stroller: sure,i haven't network in gentoo :P
00:10 <****> blindoracle: what is the ip for eth0?
00:10 <****> why do i get permission denied as root when i do watch /var/log/messages?
00:10 <****> Stroller: as i said before, ifconfig shows lo only: http://www.pastebin.cz/show/2291
00:10 <****> i chopped the # of ebuilds from 114 to 24 :)
00:10 <****> kale: 10.45.75.4
00:10 <****> well I emerged hal
00:10 <****> Kachna: `dmesg | grep eth`
00:10 <****> Cyntek: try /etc/init.d/hald start
00:10 <****> Cyntek: what do you get?
00:10 <****> any ideas?
00:10 <****> hello, where i can change on the sshd the server no kick me when i idle mode?
00:10 <****> Stroller: in gentoo i guess?
00:11 <****> blindoracle: this is quite strange, is there a MAC filter?
00:11 <****> Kurogane, don't be idle?
00:11 <****> what would I have in /var/lib that's 30GB ?
00:11 <****> it was /etc/init.d/hald start"
00:11 <****> it started okay
00:11 <****> Stroller: here's output from debian: http://www.pastebin.cz/show/2292 ..for gentoo gotta reboot again (pain in ass having 1 pc available only)
00:11 <****> HazardX, huh?
00:12 <****> Kurogane: /etc/ssh/sshd_config but i'm not sure there is such a setting.
00:12 <****> Kachna: oh, no, sorry. In the working o/s
00:12 <****> Cyntek: right ok good. Now run: rc-update add hald default
00:12 <****> Kurogane, it also may not be ssh that's closing the connection, it could be firewalls in between the machines
00:12 <****> now i have to do rc-update right
00:12 <****> i get sh: /var/log/messages: Permission denied though i am root! what gives?
00:12 <****> Cyntek: then restart KDE and you should be alright :)
00:12 <****> Kachna: hang on there
00:12 <****> Stroller: well,it was here :-)
00:12 <****> oh, that would be my vmware virtual machines lol
00:12 <****> what about the rc-update add hal default command
00:12 <****> Kachna: `lsmod` plz
00:13 <****> Stroller: ugly long one: http://www.pastebin.cz/show/2293
00:13 <****> Cyntek: rc-update add hald default instead.
00:13 <****> kale: Yes. But I've used this computer before (albeit under ubuntu) with no problems. I was able to connect during the install itself, and now it's down.
00:13 <****> anyone remembers how I can save the audio layer of a video with mplayer? (wasn't there something with mplayer file -ao audio.ext ? ) )
00:14 <****> Mirrakor: mencoder follows mplayer, mencoder can do it
00:14 <****> Kachna: ok... so what do you think the problem is?
00:14 <****> blindoracle: we could try to take the MAC address from your working system
00:14 <****> Mirrakor: man mencoder
00:14 <****> Stroller: some misssing driver in kernel?
00:14 <****> Mattias: but it was possible with mplayer too :D
00:14 <****> Mirrakor, I think it was mplayer [file] -dumpaudio then some other stuff
00:14 <****> kale: What do you mean?
00:14 <****> no, that -dumpaudio stuff is rather new afaik, there was something else..
00:15 * Stroller hands Kachna a Gold Star (tm)
00:15 <****> Skunky, i found this on sshd_config ClientAliveInterval and is set by default 0 but dunno how i can change never kick me
00:15 <****> Mirrakor: probably is, but mencoder is recommended :)
00:15 <****> -ao pcm:file=[file]?
00:15 <****>" followed by dhcp request
00:15 <****> HazardX: exactly :)
00:15 <****> Kurogane: it's more than likely not sshd that's kicking you.
00:15 <****> kale: Won't that knock this system off?
00:15 <****> Ok, Kachna - you see where in the `dmesg | grep eth0` it says "skge whatever"? Well, that's the name of the driver
00:16 <****> but I think mencoder does it the same way (if it will et you not have a -o option)
00:16 <****> blindoracle: it will, you have to release dhcp there first
00:16 <****> Kachna: and we confirm that by listing the loaded modules and skge is shown

Total 51 pages. You are browsing page 1/51.

First :: Prev :: [1] [2] [3] [4] [5] [...] :: Next :: Last